|   How to connect my sub? | Jean-Pascal Servant
Jan 10, 2002 6:18 PM | | Hi, my question is about my subwoofer, I don't know where to connect it. I'm using a RCA single to RCA single cable. With my Harman/Kardan AVR 220, the output for the sub is 1 plug. But, on the subwoofer, a Cerwin-Vega 12'', there's two input RCA plug, left and right. Where do I need to connect my cable?
Thankx :)
Jean-Pascal Servant
mallet@nbnet.nb.ca |
| re: How to connect my sub? | AVMASTER
Jan 10, 2002 7:13 PM | | subs are mono, either jack on the sub is ok ( preferably the left-don't ask why) but only one needed; in some set-ups i've used the second jack to loop out to a passive sub or (at the insistance of the customer)i'll use a Y- jack |
| re: Use a splitter | Tony P
Jan 11, 2002 4:41 AM | | If you buy a qulity cable they come with a Y adapter. Depending on the length $75 or less for Monster... |
| re: How to connect my sub? | paulbl
Jan 11, 2002 9:37 AM | | As stated before, either L or R is fine, you MAY see a higher output if you use a Y-adapter, but that's what level controls are for.
PS: you don't need to spend $75 for Monster Cable. Just go to Radio Shack or check out AR cables - you just need a good fully sheilded cable - shouldn't be more that 30 bucks or so depending on length. |
| re: How to connect my sub? | bob d
Jan 12, 2002 6:51 AM | | it does not make any difference any one will work and work the same if you are told any thing else they dont know what they are talking about and i should know i work for a speaker co |
| |
